Control Eva via app

Read on to find out how you can connect your Eva using the Smart Life – Smart Living app. Monitor air humidity from anywhere.
Eva is equipped with Wi-Fi starting from production year 2021.

The smart life app

The Smart Life – Smart Living app is the control centre for all your smart home devices. You can use this app to control any devices which are fitted with a Tuya chip.
 

Create a Smart Life – Smart Living account

You need an account to control your Eva using the app. Start by downloading the app from the App Store or via Google Play and then installing it.

Stadler Form App registration

Open the app and create a new account. If you
already have an account, you can login using
your user data.

Stadler Form App registration

To register, you will need to select your country and enter your e-mail address.

Stadler Form App registration

A verification code will then be sent to the e-mail address you entered. Input this code in the app and create a password.

You’re ready to go! The main menu of the app will now appear.
 

ADD AIR HUMIDIFIER EVA TO THE SMART LIFE APP

To be able to control your Eva using the Smart Life – Smart Living app, you will need to connect the device to the app. To do this, follow the step-by-step process below (from left to right).

Icons bluetooth Wi-Fi connection

Make sure that the Wi-Fi connection and Bluetooth
are activated on your smartphone. Select the Wi-Fi network you want to use to connect the device.

on / off button

Connect your Eva to the mains and switch on the device.

Connect Eva Wi-Fi

Press the button for night mode for 5 seconds until the water level indicator starts flashing quickly.

Add device in app

If Eva now appears in the app automatically,
click on «Go to add».

Add device in app

If Eva does not appear automatically, click on «+» in the top right-hand corner of the main menu.

Add device in app

Select «Small Home Appliances» on the left-hand side. Scroll down until the air humidifier appears under the heading «Surroundings» and select «Humidifier (Wi-Fi)». Follow the instructions on the screen.

Add device to the app

If the following prompt appears: Grant your smartphone access to the location of your device.

Add device to the app

Then select a 2.4 GHz WLAN network and enter the associated password.

Add device to the app

Eva must be in pairing mode before a connection can be made. To do this, according to the app you should check that the water level indicator is flashing. As soon as the water level indicator starts to flash, click on «Next» and then «continue».

Add device to the app

Bluetooth will be connected automatically.
Should that not be the case, tick the box
next to Eva and click on «+» next to
«Bluetooth device».

Add device to the app

Re-enter your Wi-Fi login and the associated password.

Eva water level indicator light up

The pairing process will now begin. After a few seconds, the water level indicator on Eva will light up constantly which means that the device has been found by the Smart Life – Smart Living app.

Complete Stadler Form app set up

Congratulations! Eva has been added to the Smart Life – Smart Living app. All the functions of the device can now be controlled using the app. Besides the original functions, child protection can be enabled in the app which will deactivate the buttons on the device itself.

FAQ

If the water level indicator on the front lights up and Eva can be seen in the app at the same time, your Eva is connected.

Any questions?

If you have any further questions or ambiguities regarding the connection of your air humidifier with the Smart Life – Smart Living app on your smartphone, about the control or the functions of your Eva air humidifier, you can contact us by phone, e-mail, Twitter or Facebook