Frequently asked questions about Theo
Theo’s timer can be programmed with a delay start of 1 to 7 hours or an operating period of the same time span.
Theo must be switched on for you to be able to set the operating period. Press the timer button to set the operating period. Press the button once to set the operating period to 1 hour, press it again for 2 hours, and so on. The period remaining is indicated by the illuminated numbers. The appliance will switch off automatically at the end of the operating period set.
For you to be able to set the delay start of 1–7 hours, the device must be in standby mode (switched off, power cable connected to the mains) sein. Press the button once to switch on the appliance after 1 hour, press it again for 2 hours, and so on. The time remaining until the appliance is switched on is indicated by the illuminated numbers. The appliance will switch on automatically at the end of the period of time set.
If desired, it is possible to connect the drainage hose to Theo for permanent water drainage. In this case, slip the hose over the inner drain valve on the back of Theo. Place the other end of the drainage hose in a water outlet. Please make sure the end of the hose is lower than the spout, otherwise the water will not drain, and flooding may occur.