Frequently asked questions about Charly stand
If there is only 1 fastening clamp, you can perform the correction directly on the Charly fan. Open the clamp and press this to the back with your thumb, towards the motor. Then close the clamp again. The grate should now hold together firmly.
If more than just 1 clamp is loose, remove the front protective grate from the fan. Now press all loose clamps with your thumb towards the motor (away from the grate). Then affix the grate back to the fan and close the clamps. Picture for explanation
We are devoted to protecting the environment. For this reason, we have reduced the shipping volume of the new Charly fan. Please find the assembly instructions for Charly stand at: https://youtu.be/CzsQBS-nNP0
To clean the fan blades, remove the safety screw, open all clamps and carefully lift off the safety grille on the front. Now you can clean the fan blades with a moist cloth and dry afterwards. After cleaning, replace the safety grille onto the device (remount position clamps at the top), close all clamps and tighten the safety screw.