Problem: nobody likes cold feet
It’s not time to put the central heating on yet or it’s already been switched off – but we’re freezing. Those are the times when we have to make our homes cosy and warm ourselves.
The same goes for rooms with little or no heating all year round. It might be the hobby room, the attic, the basement or the storeroom that has just been repurposed as a home office. It is particularly important to make sure that there is a pleasant temperature when converting a room. That way, you will be able to focus on the job at hand rather than being distracted by the freezing cold temperature in the room.
Having a separate source of heat can also help in specific areas. For instance, an employee who is freezing in an open-plan office can keep his feet warm without disturbing his colleagues. Or it can provide a bit of extra warmth at the changing table so that your baby doesn’t get cold during changing. If the central heating isn’t enough, a fan heater can produce the boost of heat that you need.
The solution: a fan heater – but the right one
Whether it’s for your feet or a whole room – the right heater can create the warmth you need.
They all work on the same principle: a heating element (wire or ceramic) produces heat that is blown into the room by a built-in fan. There are various types of heater on the market and a wide range of designs to choose from. Our most important tip: always pay attention to safety and buy devices with overheat and tilt protection.
HOW TO FIND THE RIGHT FAN HEATER
Choosing the right fan heater for your particular needs is challenging and requires some prior knowledge. Below you will find some tips to help you with the purchase of the ideal heater.
Not all fan heaters are appropriate for all room sizes. Find out prior to purchasing which heater is appropriate in your case. Generally speaking, manufacturers work on the basis of a 2.5 m room size.
A heater is suitable for many areas. For example, in your living room, children's room, kitchen, bathroom, study, garage, hobby room, recreational vehicle, gazebo or in the event of a failure of your central heating system. Please note that IP21 protection is imperative when using a heater in the bathroom.
There are different types of fan heater technology: PTC ceramic heaters, fan heaters, quartz heaters, oil-filled radiators or infrared heaters. The respective technology is chosen according to individual well-being. That is why testing the different technology types at an approved retailer is recommended.
Power consumption is only very high if attention is not paid to the time and the level at which the fan heater is running. Exactly as much power is consumed as is stated for the performance (power in Watts) of the fan heater. Consequently, heaters are by no means power guzzlers as they produce the same amount of energy as heat as they consume.
With fan heater, it is not only the decibel level that is to be observed as this involves a consolidation of different frequencies. A frequency can, therefore, be very disturbing even though the decibel level is within the tolerance range. It is therefore recommended that you hear what the fan heater sounds like in operation in a quiet environment in the shop prior to making the purchase.
Nowadays, great importance is placed on technical equipment. With regard to fan heaters, this manifests itself in the number of heat levels, whether there is an integrated thermostat, or whether the fan heater even regulates the heat levels automatically, as is the case with Adaptive HeatTM in the fan heater Paul. There are even fan heaters that come with a remote control.
Room sizeRoom size is an important factor as not all heaters are suitable for large rooms, or it can take too long to heat a room. For this reason, we recommend measuring the room size first of all and then selecting the right heater.
Overheat protectionMake sure that your heater has overheat protection so that you can leave the room without having to worry.
Tip-over protectionThanks to tip-over protection, the fan heater stops heating automatically as soon as the appliance tips over. This protection is especially important if children knock the fan heater over.
Noise levelFind out about the noise level prior to making the purchase. Decibel levels alone are not sufficient. It can also be the case that noises occur at a low decibel level which can be subjectively perceived as disturbing. It is best if you listen to an appliance at an approved retailer.
Performance per WattNote the performance of the fan heater. Some are very powerful (approx. 2'000 W) while others are rather weak (approx. 500 W). The more heat energy required, the more powerful (higher Wattage level) the heater should be.
Power consumptionPower consumption is an important topic when it comes to fan heaters. The fan heater consumes exactly as much power as it ultimately reproduces in heat output. For example, a 500 W heater consumes precisely this amount in power (Watts). Consequently, heaters are by no means power guzzlers as they produce the same amount of energy as heat as they consume.
Temperature controlIdeally, you switch on your fan heater once and it will regulate itself independently from that point on. Ensure that your fan heater has temperature control (integrated thermostat). This means you won't spend much time constantly making manual adjustments to the temperature by turning the heater on and off.
Heat levelsFind out about the heat levels available prior to making the purchase. This will allow you to regulate your fan heater precisely as and when you need to.
Transition period (spring / autumn)The transition to spring and autumn can be made more pleasant with a heater. The heater serves as a very good complement to your central heating system if this has not already been switched on or has already been switched off.
Frost protectionEnsure that your chosen heater has a frost-protection function, for example, in order to prevent frost formation in your holiday apartment or gazebo. Frost can be prevented if the heater sustains a uniform temperature over a longer period of time.
Fan heaters from Stadler Form
At Stadler Form, safety is paramount with all our devices – especially our heaters. All our fan heaters have overheat protection. Apart from Max, all our fan heaters have a PTC ceramic heating element. With this type of heating element, there is no risk of overheating at all. Max has a wire heating element and built-in overheat protection. The Anna family and Paul also have tilt protection. If the device falls over, it switches off automatically so there is no fire hazard for surfaces or objects which the fan heater may fall onto.
With their built-in thermostat, Stadler Form electric heaters switch on and off automatically and maintain the temperature you require. This guarantees energy-efficient use of the heater and prevents unnecessary power consumption.
Anna big and Paul – the largest members of our fan heater family – are also equipped with the unique Adaptive HeatTM technology. This ensures that in Auto mode, the heat output is adapted automatically in order to maintain the desired level of heat so there’s no on/off, just a constant temperature that you can rely on.
Stadler Form has a wide range of devices for different needs – you’ll definitely be able to find exactly what you’re looking for!
Take Anna little, for example: she’ll make sure that your feet are never cold under your desk again.
Desired temperature is adjustable
Two heating levels (700, 1’200 W)
Small and slim
Or Paul who quietly provides warmth or cools you down depending on your mood.
Adaptive Heat™ Technology
2 in 1 function – heating and cooling