Theo
€ 269.00
Product information Theo
Awards
| Product family | Dehumidifier |
|---|---|
| System | Compressor |
| Color | white |
| Room size m² | 40 |
| Room size m³ | 100 |
| Capacity | 10 l |
| Power level | 1 |
| Power consumption | 280 W (30°C 80% RH) |
| Water tank capacity | 2.1 l |
| Noise level | 42 dB(A) |
| Weight | 11.4 kg |
| Dimensions | 305 x 516 x 216 mm |
Instruction manual and more
Video tutorials
Integrated hygrostat
An integrated hygrostat means the desired humidity can be set to 40%, 50% or 60%. Alternatively, Theo can run continuously.
Independent operation
A timer can either be used to programme a start delay of 1-7 hours or continuous operation for the same period of time. When the set period of time finishes or the water tank is full, Theo switches off automatically.
Easy to move around
If you want to move Theo from one room to another, his convenient handle makes him easy to pick up and carry with one hand.
Good to know
Find important information here
Yes, Theo switches on again after a power failure and your settings will be saved. For that reason, he can also be operated using a timer.
If you want to connect the device directly to the water outlet, you can insert the drainage hose into the device. Then connect the hose to the internal drain valve on the back of Theo. Place the other end of the drainage hose directly over the water outlet. Please note that the outflow end of the hose should be lower than the inflow end so that the water can drain off.
Accessories
Theo
The Designer
Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...
