Anton
€ 79.00
Product information Anton
Awards
Important purchasing advices
Room size
We recommend a more powerful humidifier for Minergie houses (low energy or passive houses) or apartments for which calculations should be based on twice the room size.
The reason for this lies in the continuous exchange of air: cold and dry outdoor air is heated up and channelled indoors. The moisture produced by people, animals, furniture, plants, cooking, showering, etc. is quickly directed outside by the continuous exchange of air, usually resulting in extremely dry air indoors. Controlled ventilation systems therefore have the same effect as open windows.
Water quality
If your water at home is very hard (from 14 °dH) or you use a water softener, we advise you not to use an ultrasonic nebuliser. With an ultrasonic nebuliser, the limescale (or the salt from the water softener) in the water will also be turned into tiny particles which will then settle as a white deposit. If you have hard water, we recommend using an evaporator (e.g. Oskar).
You can find out the hardness of your water using a test strip or even by contacting your local authority.
Product family | Humidifier |
---|---|
System | Ultrasonic |
Color | white |
Accessories (included) | Water Cube |
Room size m² | 25 |
Room size m³ | 63 |
Capacity | 170 g/h |
Power consumption | 12 W |
Water tank capacity | 2.5 l |
Noise level | 28.5 – 30 dB(A) |
Weight | 1.9 kg |
Dimensions | 184 x 262 x 184 mm |
Instruction manual and more
Video tutorials
Good to know
Find important information here
Alternatively, distilled water can also be used. Video distilled water
In addition, the intensity of the fragrance is influenced by various factors:
The intensity of a fragrance will depend on the fragrance itself. Natural fragrances are often more discreet than synthetic ones and certain ingredients are more dominant than others.
It should also be remembered that first and foremost, the device is a humidifier. Its main focus is to provide humidity in the room and because of that, the intensity of its fragrance will never be as strong as the fragrance from an aroma diffuser.
Is the float gauge free of dirt and limescale and does it move up and down easily (see image)? The float gauge may have become clogged with fragrance residues or limescale. Please clean Anton according to the instructions for use.
Make sure that the new anticalc cartridge has been immersed in water for at least 24 hours prior to use (not in the water tank). If you forget to do this, please do so immediately.
After 3 months, replace the anticalc cartridge with a new one.
Check to make sure that water can flow out of the tank by holding the water tank over a sink and holding down the valve under the tank cover. Water should now flow out. If that is not the case, remove the anticalc cartridge from inside the tank cover and try again. If water now flows out, the anticalc cartridge is blocked and will have to be replaced. If that does not rectify the problem either, contact the retailer from whom you purchased your Anton and order a new tank cover.
Attention: Never immerse the device in water (danger of short-circuit).
Daily: Fill the water tank with fresh, cold tap water. If the device is not going to be used for several days, empty the water from the water tank beforehand and if necessary, clean it with a drop of washing-up liquid and a clean cloth. Then fill the water tank with fresh water before putting the device into operation again. Video Cleaning the water tank
Every 2 weeks: Remove the water tank, the mist outlet, the mist chamber and the Water Cube™. You can now clean the ultrasonic membrane using a common household descaler. It is important to make sure that the water level inside the device is not higher than 10 mm. Should the water level accidentally exceed 10 mm, contact Stadler Form or a specialist technician immediately. If you are unable to remove all the residues, you can clean the ultrasonic membrane using the cleaning brush (front or back). Please do not attempt to chip limescale deposits off the membrane using a hard object. In the case of stubborn limescale deposits, we recommend repeating the descaling process several times in a row. After descaling, rinse out the lower part and then dry it thoroughly. Clean and descale the water tank. Then put back the water tank, the mist outlet, the mist chamber and the Water Cube™. Video Cleaning
Regularly as required: To clean the outside, rub with a damp cloth and then dry thoroughly.
At the end of the season: Before putting away the device at the end of the season, carry out descaling as described above. Clean and descale the water tank too. Then clean the device thoroughly inside and out and let it dry completely. Insert a new Water Cube™ so that your device will be ready to be put into operation at the start of the next season.
Accessories
Anton
Reviews
Tolles Produkt, wenn es funktioniert
Leider hat der neu erworbene und original verpackte Anton in den Skiferien angekommen nicht funktioniert. Der Frust war eher gross, da das andere Gerät zu Hause einwandfrei funktioniert und die richtige Luftfeuchtigkeit im Kinderschlafzimmer zu ru...
Review from Anonymous at 08.03.2022Mon ANTON
Appareil beau, efficace et discret. Après 4ans d'utilisation permanente sans panne, je l'ai envoyé pour une révision. Je suis donc très satisfait! Merci à Stadler Form
Review from Philippe Ritter at 06.05.2021Anton
The Designer
Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...