Product information Simon

Quiet, powerful and provides all-round refreshment: with his 3D oscillation mode and a wind distance of up to 10 metres, Simon ensures optimum air circulation in large rooms too. Despite being powerful, the 3D pedestal fan is extremely quiet. Whether you require a gentle breeze or refreshing wind, the air flow can be easily adjusted with a range of individual settings to choose from. Thanks to power memory function, Simon remembers the last settings selected. As a 3D fan, Simon cleverly combines function and aesthetics.

Product family Fan
System 3D air circulator
Color white
Capacity 997 m3/h
Power level 10
Power consumption 1.7 – 28 W
Noise level 25 – 52 dB(A)
Weight 4.6 kg
Dimensions 276 x 820 x 261 mm

Awards

Instruction manual and more
Video tutorials

Easy to use

Simon has a practical foot-operated switch, making him easy to switch on and off. The pedestal fan also has a magnetic remote control for easy control of his functions.

Intelligent features

Thanks to horizontal and vertical oscillation, Simon optimally distributes the air in the room. The fan also has other practical functions. For example, he offers a mode that simulates natural wind conditions, 10 different speed levels and a 1-7 hour timer.

Practical, simple design

The pedestal fan has a simple design with a washable textile cover and you can unscrew his front and rear grilles for easy cleaning.

Good to know

Find important information here

Switch Simon on using his foot-operated switch. Then press and hold down the on/off button on the remote control for 5 seconds until you hear a bleep. This indicates that connection was successful, and you can now control Simon using his remote control.

In this video we explain the procedure step by step.

To clean the textile cover, start by detaching Simon’s fan housing from the pole. Now you can remove the 4 screws on the back of Simon holding the air inlet grille in place and the single screw underneath for the air outlet grille. There are small openings in the textile cover which are used to fit it over the front and back of the housing. All of these must be released.

The textile cover can be washed at 30° C on a gentle wash cycle. The cover must be completely dry before you fit it to the device again.

When refitting the textile cover, make sure that the hole for the pole is in the right place. If it is, you can pull the textile cover over Simon’s fan housing again. Make sure that all the holes line up properly on the front and back of the housing. Finally, replace the two grilles (air inlet/air outlet) and tighten all 5 screws again.

In this video, we show you from second 44 how to remove and reattach the textile cover.

Simon

Reviews

(4)

Stylish companion for hot days

I love the functionalities of rotation, in all directions. It (almost) doesn't matter where you position it, it will do a great job. And it is silent yet really powerful. Looks stylish too! My only drawback / wish - would be to have it a bit tall...

Review from GEORGINA at 17.06.2024

DesignLover

Lieferung, Verpackung, Design und Qualität son absolut phantastisch ich bin schon lange nicht mehr so überrascht gewesen beim öffnen der Lieferung. Es ist wirklich Schmuckstück in meiner Wohnung. Andreas

Review from Anonymous at 05.07.2023
Rate product View all reviews

Simon

The Designer

During our years of study, we (Fabian Bernhard and Thomas Burkard) recognised the mutual passion for clear and simple shapes as well as for unconventional concepts and smart ideas. In 2010, we founded the BERNHARD I BURKARD design studio ...

Bernhard & Burkard

Learn more

Our recommendation

You might like that

(0)
Charly floor
€ 149.00
(0)
Charly little
€ 139.00
(0)
Charly stand
€ 179.00
360 Model
(0)
Finn
€ 129.00
360 Model
(1)
Finn mobile
€ 179.00
360 Model
(14)
Leo
€ 109.00
360 Model
(0)
Otto
€ 174.00
360 Model
(29)
Peter
€ 199.00
360 Model
(29)
Peter
€ 179.00