Skip to main content Skip to search Skip to main navigation

Connect Noah Pro with the Stadler Form App

Here, you'll find out how to connect your humidifier Noah Pro, with the Stadler Form app. Monitor the room humidity and control your humidifier from anywhere.

Important note for Android users
In order for your Android device to establish a proper connection to the app, you must make additional settings on your Android device. Click here to access the step-by-step guide.

The Stadler Form App

With this app, you can make even more efficient use of your Stadler Form indoor climate devices. Control one or more Stadler Form devices remotely. To control devices that have Wi-Fi capability, you need the app as well as an account. Download the app from the App Store or via Google Play, install it, and register.

Stadler Form App Log in

Download the app and open it. If you already have an account, you can log in using your user data. If you're new, you'll need to register first.

Stadler Form App connection settings

Make sure that the Wi-Fi connection and Bluetooth on your smartphone are enabled. Select the Wi-Fi network you'll be using to connect the device later. 

SF App Noah Pro panel

Turn on your Noah Pro. Ensure that the Wi-Fi icon next to the humidity value on the display flashes rapidly. If it is not, press the Wi-Fi button at the bottom for 3 seconds until the icon flashes rapidly.

SF App add Noah Pro automatically

Noah Pro will now automatically appear in the app under "Discovering devices". Simply click "Add," wait until he's connected, and you're good to go.

Stadler Form App add manually

If Noah Pro doesn't appear automatically, click the "+" icon in the top right corner of the main menu, then select "Add Device."

SF App add Noah Pro manually

Next, choose Noah Pro from the overview.

Stadler Form App Ghz select

Select a 2.4 GHz Wi-Fi network and enter the corresponding password. The device can only be connected to a 2.4 GHz network.

SF App activate Noah Pro Wi-Fi

Noah Pro needs to be in pairing mode for a connection to be established. Press the Wi-Fi button at the bottom for 3 seconds to activate pairing mode. Once the Wi-Fi icon next to the display is blinking rapidly, confirm this and click "Next".

SF App connects

Now, the pairing process begins. After a few seconds, the Wi-Fi icon next to the humidity value on the display will stay lit steadily, indicating that the app has located the device.

SF App Noah Pro is added

The device is now added to the app.

SF App Noah Pro add complete

Noah Pro is now connected and successfully added in the app. Click "Done" now.

SF App Noah Pro Control

Done! You can now control Noah Pro through the app. By the way, you can activate the child lock in the app. This feature prevents the buttons on the device itself from being operated. 

Note for Tuya app users
If you have been using the "Smart Life – Smart Living" app from Tuya for your Stadler Form devices, you can continue to do so. However, it's not possible to have a device stored and operated in both apps. We recommend switching to the Stadler Form app, as it will be further developed to provide an even better experience in the future. Please note that when you switch, you'll need to create a new account for the Stadler Form app and re-register your Stadler Form devices.

FAQs

The device can only be connected to a 2.4 GHz network. If your router does not offer a separate 2.4 GHz network, you must configure it so that it only uses the 2.4 GHz band. It is not possible to connect to a combined 2.4/5 GHz network or a pure 5 GHz network.

View complete instructions

After you have connected to the Stadler Form app, it will take a few seconds for the measurement data to be displayed in the app.

The device can be disconnected from the app quite easily. Go into the app and delete the device. Or alternatively, hold down the Wi-Fi button on your Stadler Form device resp. the button for night mode on your Eva for 3-5 seconds. When the wi-fi button or the water level indicator (Eva) starts to flash rapidly, you know that your device is no longer connected to the app.

Only one account can be connected to the device.

In your Stadler Form app account, however, you can share access to control your device with other people. To do this, go to the desired device, click on settings in the top right-hand corner and select "Share Device". Here you can grant access.

  • Restart your mobile phone

  • Switch off your router or Wi-Fi, wait 30 seconds and then switch it back on again. Then you can try again to add your device automatically, as described in the instructions

  • If a timeout still keeps occurring, add your device manually

Alex: If the front LED is on and you can see Alex in the app.

Eva: If the water level indicator on the front lights up and Eva can be seen in the app at the same time, your Eva is connected.

Karl or Karl big: If the LED below the Wi-Fi icon is solid, your humidifier is connected to the app.

Lukas and Lukas big: If the LED above the Wi-Fi button is constantly lit, then your device is connected to the app. 

Roger or Roger big: If the Wi-Fi symbol on the display is lit constantly, then your device is connected to the app.

Sam: If the Wi-Fi symbol on the display is constantly lit, then your device is connected to the app.


Important note for Android users
To connect correctly to the app, you must make additional settings on your Android device. Click here to go to the step-by-step instructions.

Make sure

  • that your Stadler Form device is connected to the power supply correctly and switched on
  • that your smartphone is connected to WLAN and Bluetooth
  • that you choose a 2.4 GHz network
  • that the wireless network is enabled on the Stadler Form device. If not, hold down the Wi-Fi button resp. the button for the night mode on Eva for 3 seconds


No, Stadler Form devices can't currently be integrated in the HomeKit.