Charly stand

Lifts off!

CHF 139.00

Moves up to 6000 cubic meters of air per hour
Horizontal swivel function (oscillation)
Easy cleaning of fan blades

In 1-3 Days delivered

Product information Charly stand

The fan Charly has already achieved cult status. The exceptional wind machine is equipped with oscillation. Charly thereby distributes the cool air steadily in the room. With a design resembling a jet aircraft turbine and an air-moving performance to match: three aluminium blades allow this fan to shift up to 6000 cubic meters of air an hour. But thanks to his rounded, die-cast zinc base, the ventilator Charly remains firmly anchored on the ground, while it is still adjustable in inclination and height.

Product family Fan
System Pedestal fan
Color silver
Capacity 6000 m3/h
Power level 3
Power consumption 36 – 60 W
Noise level < 56 dB(A)
Weight 9.4 kg
Dimensions 450 x 1300 x 400 mm


Video tutorials

Good to know

Find important information here

Charly stand’s motor housing is connected to his telescopic tube by means of a socket screw located on the side. This can work loose over time. You can secure Charly stand’s head in an upright position by tightening the screw.

To clean the fan blade, remove the securing screw, undo all the fixing clips and carefully remove the protective grille from the front. Now you can wipe the fan blade with a damp cloth and then dry it thoroughly. After cleaning, put the protective grille back on the device (fit the top positioning clip), fasten all the fixing clips and tighten the securing screw firmly

Charly stand



Buono, ma alcune imprecisioni

Motore potente Silenzioso Tuttavia le hriglie di sicurezza non combaciano perfettamente tra di loro, i gancetti di fissaggio non sono abbastanza larghi, ed è stato dimenticato un foro per il fissaggio del gancetti in basso alla griglia posteriore.

Review from Mauro at 31.05.2022

Good, but loud

I purchased this fan after having returned a fan from a cheaper local brand because it was poorly manufactured and the front grille would not attach correctly. The Charly Stand was the only other metal-body pedestal fan available among my local re...

Review from Thomas at 06.11.2021
Rate product View all reviews

Charly stand

The Designer

Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...

Matti Walker

Learn more

Our recommendation

You might like that

Charly floor
CHF 119.00
Charly little
CHF 79.00

instead CHF 98.00

Save CHF 19.00

Charly stand
CHF 139.00
360 Model
CHF 110.00
360 Model
Finn mobile
CHF 159.00
360 Model
CHF 95.95
360 Model
CHF 179.00
360 Model
CHF 189.00
360 Model
CHF 169.00