Product information Eva

As a power-woman, Eva blows the mist high up in the air using ultrasonic technology and provides for precise humidification with an external sensor. The remote sensor also serves as a remote control, which makes handling the humidifier very convenient. The selectable water pre-heating not only increases the humidification output, but also emits a comfortable warm mist. Eva's LEDs can be dimmed or switched off completely - making her also perfect for the bedroom.

Important purchasing advices

Room size
We recommend a more powerful humidifier for Minergie houses (low energy or passive houses) or apartments for which calculations should be based on twice the room size. The reason for this lies in the continuous exchange of air: cold and dry outdoor air is heated up and channelled indoors. The moisture produced by people, animals, furniture, plants, cooking, showering, etc. is quickly directed outside by the continuous exchange of air, usually resulting in extremely dry air indoors. Controlled ventilation systems therefore have the same effect as open windows.

Water quality
If your water at home is very hard (from 14 °dH) or you use a water softener, we advise you not to use an ultrasonic nebuliser. With an ultrasonic nebuliser, the limescale (or the salt from the water softener) in the water will also be turned into tiny particles which will then settle as a white deposit. If you have hard water, we recommend using an evaporator (e.g. Oskar). You can find out the hardness of your water using a test strip or even by contacting your local authority.

Product family Humidifier
System Ultrasonic
Color white
Accessories (included) Water Cube, Anticalc cartridge
Room size m² 80
Room size m³ 200
Capacity 550 g/h
Power level 5
Power consumption 10 – 95 W
Water tank capacity 6.3 l
Noise level 26 – 34 dB(A)
Weight 3.264 kg
Dimensions 196 x 418 x 196 mm

Awards

Video tutorials

High flexibility

Eva is also very flexible and offers the choice of five output levels and selectable humidity from 30 % – 75 %.

Wi-Fi equipment

Eva is equipped with Wi-Fi. This allows the air quality to be monitored in real time and all device functions to be controlled. And it's easy to do with the Stadler Form app on your smartphone.

Auto mode

Thanks to the Adaptive Humidity™ technology in auto mode, Eva automatically adjusts the output level to reach and maintain the desired humidity quietly and efficiently.

Ben

for rooms up to 25 m2

Eva little

for rooms up to 50 m2

Eva

for rooms up to 80 m2

Good to know

Find important information here

If you notice droplets (or other signs of moisture) on or around the device, this is condensed water from the humidifier. This means that the air can no longer absorb the moisture from the humidifier. Please reduce the humidification output to such an extent that droplets are no longer visible.

You can use any commercially available fragrances, aromatic oils or essential oils with Eva. It is important to use oils which are as natural as possible and do not contain alcohol, such as our pure essential oils. We recommend putting 2-3 drops in the fragrance container. The fragrance should not be added directly to the water.

The intensity of the fragrance is influenced by various factors:
– Type of fragrance (synthetic, natural, ingredients, etc.)
– Room temperature and relative humidity (the more humid the air, the stronger the fragrance will be)
– Room size (the smaller the room, the more intense the fragrance)

The intensity of a fragrance will depend on the fragrance itself. Natural fragrances are often more discreet than synthetic ones and certain ingredients are more dominant than others.

It should also be remembered that first and foremost, the device is a humidifier. Its main focus is to provide humidity in the room and because of that, the intensity of its fragrance will never be as strong as the fragrance from an aroma diffuser.

All devices with a production date of May 2019 (SN number 1905 xxxxx, see the rating plate on the bottom of the device) or later are equipped with new technology and therefore have a float switch. Please start off by checking that the float switch (red arrow) can move up and down. It may be that it has become stuck due to excessive limescale/dirt. Descale the water tray regularly in order to ensure fault-free operation.

Please rinse out Eva’s water tray thoroughly with warm water and make sure that the heating plate and the membranes are free from limescale. Descale the water tray, if necessary. Make sure that no water gets into the air opening in the water tray. Fill the water tank and start Eva again. If the red LED still lights up, please remove the anticalc cartridge (located on the inside of the water tank, attached to the water tank cover) and leave Eva running without the anticalc cartridge for 30 minutes. If Eva still does not work properly after doing this, please contact the retailer from whom you purchased your Eva so that you can have her repaired.

For hygienic reasons and to ensure proper operation, we recommend the following cleaning intervals.
Attention: Never immerse the device in water (danger of short-circuit).


Daily: Fill the water tank with fresh, cold tap water. If the device is not going to be used for several days, empty the water from the water tray beforehand and if necessary, clean it with a drop of washing-up liquid and a clean cloth. Fill the water tank with fresh water before putting the device into operation again. Video cleaning the water tank

Every 2 weeks: First remove the water tank, the mist chamber and the Water Cube™. Clean the inside of the water tray thoroughly using a drop of washing-up liquid, warm water and a soft, clean cloth, sponge or brush. If there are limescale deposits in the water tank, use a descaling solution diluted with water (for the mixture ratio, see the manufacturer’s instructions). Then rinse out the water tray thoroughly with cold water and put back the water tank, the mist chamber and the Water Cube™.  Video Cleaning

Important: the heating plate should also be descaled regularly. If there is a build-up of limescale, annoying high-frequency noises can occur.

At least once a month: Carry out descaling in accordance with the instructions for use. Cleaning video

Regularly as required: To clean the outside, rub with a damp cloth and then dry thoroughly.

At the end of the season: Before putting away the device at the end of the season, carry out descaling as described above. Then clean it thoroughly inside and out and let it dry completely. Insert a new Water Cube™ so that your device will be ready to be put into operation at the start of the next season.

The ultrasonic technology turns the water into mist. In the process, the limescale in the water is converted into minute particles which are then deposited as a white film on furniture. That is why we recommend using an anticalc cartridge which will reduce the limescale content in the water. If the water is hard (14 - 21 °dH) or very hard (from 21 °dH), you will have to change the cartridge very frequently in order to prevent the occurrence of the white film. Eva should not be operated using decalcified water from a water softener which is based on the principle of ion exchange (salt is added to the water) either. The salt contained in the water can also accumulate around the device in the form of white dust. For that reason, we recommend using an evaporator if you have extremely hard water or decalcified water.

Alternatively, distilled water can also be used. Video distilled water

Eva

Reviews

(33)

Kundendienst Super

Habe einen EVA Luftbefeuchter der Dampf ging nicht mehr .Habe es eingesendet zur reparatur. Ich war überrascht, als mir die DHL ein paar Tage spärter ein eues Gerät brachte. Danke. EVA ist ein sehr guter Luftbefeuchter. Werde die Firma Stadler...

Review from Susanna Wolfer at 08.02.2024

Tolles Gerät

Sehr leises Gerät super einfache Bedienung mit der app bin sehr zufrieden.

Review from Patrick Brandenberger at 16.02.2023
Rate product View all reviews

Eva

The Designer

Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...

Matti Walker

Learn more

Our recommendation

You might like that

360 Model
(3)
Ben
CHF 119.00
360 Model
(3)
Ben
CHF 119.00
360 Model
(6)
Emma
CHF 39.00

instead CHF 59.00

Save CHF 20.00

360 Model
(6)
Emma
CHF 39.00

instead CHF 59.00

Save CHF 20.00

360 Model
(33)
Eva
CHF 149.00
360 Model
(33)
Eva
CHF 173.95
(5)
Eva little
CHF 119.00
(5)
Eva little
CHF 109.95
(14)
Fred
CHF 129.00