Albert
CHF 499.95
Product information Albert
Where humid rooms are a nightmare, the dehumidifier Albert feels right at home! On the ground floor or in the basement, in the house by the water or even in the laundry, Albert is an efficient dehumidifier. The swing function of the air outlet ensures optimal air distribution. The dehumidifier Albert avoids efficiently mold in any room.
Product family | Dehumidifier |
---|---|
System | Compressor |
Color | white |
Room size m² | 70 |
Room size m³ | 175 |
Capacity | 20 l |
Power level | 3 |
Power consumption | 270 W (26.7°C 60% RH) |
Water tank capacity | 4.6 l |
Noise level | 33 – 44 dB(A) |
Weight | 13.3 kg |
Dimensions | 350 x 655 x 252 mm |
Awards
Instruction manual and more
Video tutorials
Swing function
Thanks to the air outlet swing function, Albert ensures optimal air distribution.
Integrated hygrostat
Albert is equipped with a hygrostat so the dehumidifier will switch off automatically once the desired humidity is reached and switch himself back on again if the humidity rises above the desired level.
Practical features
Albert operates quietly and is equipped with Night mode so you are guaranteed to get a good night’s sleep.
Good to know
Find important information here
Yes, Albert has a memory of 24 hours and switches on again after a power failure. For that reason, he can also be operated using a timer.
If you use Albert for a long period of time or if the air in the room is polluted, the water outlet can become blocked. If that is the case, the water will no longer be able to flow into the water tank properly and will leak out. As a result, you may find small pools of water underneath or near to the unit. Click on the link for brief instructions on how to clean the water outlet. If the problem persists, please contact your local service department to arrange for your Albert to be inspected.
Unfortunately, this is due to a technical fault. Please return your Albert to the retailer from whom you purchased the device. If you live in Switzerland, you can return the device to us directly using the service form which can be found by going to www.stadlerform.com/service.
If you want to connect the device directly to the water outlet, you can insert the drainage hose into the device. For easier handling, we recommend removing the water tank. Then connect the hose to the internal drain valve on the back of Albert. Put the water tank back and place the other end of the drainage hose directly over the water outlet. Please note that the outflow end of the hose should be lower than the inflow end so that the water can drain off.
Accessories
Albert
The Designer
Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...